New product

Etherber V1.6.1 is an extension board for RaspBerry Pi.

It has two functionalities:

  1. EtherCAT® interface
  2. One Real Time clock powered by a 12 mm battery (Battery CR1216 is not included).

Country of origin is Italy

Customs charge code / HS CODE 85049005

More details

90 Items

69,00 €

More info

EtherCAT® is an Ethernet-based fieldbus system, invented by Beckhoff Automation. The protocol is standardized in IEC 61158 and is suitable for both hard and soft real-time requirements in automation technology. EtherBer V 1.6.1 is an extension board for RaspBerry Pi based on LAN9252 EtherCAT® Slave produced by Microchip. The LAN9252 is a 2/3-port EtherCAT® slave controller wi th integrated dual Ethernet PHYs Which Contain each to full-duplex 100BASE-TX transceiver and support 100Mbps (100 BASE-TX) operation. Three possible configurations are possible: Microcontroller Mode, Digital I / O and Expansion Mode. Our board implements a fusion between the Microcontroller mode and the Digital I/O.The real time clock is based on DS3231 with internal oscillator I2C controller. It is full compatible with linux too. Using I2C Kernel module, and standard kernel functions, date and hour can be set/get by simple commands. On the bottom side is located an on board battery to guarantee a data autonomy (Battery CR1216 is not included). In chapter hardware there are all informations on principal components, schematics to rebuild and modify RaspBerry PI board. The new board is desaigned with the Raspberry Hat specification.

Country of origin is Italy

Customs charge code / HS CODE 85049005