No products
CAN BUS SHIELD There are 6 products.
-
22,00 € In StockCan Bus Board Enclosure
It’s possible to insert the Raspberry with our Can Bus boards into a Phoenix din enclosure.
22,00 €In Stock -
15,00 € In StockQUAD CAN ADAPTER
Quad CAN BUS is an open hardware to connect a couple of our can bus boards to Raspberry Pi. In this way it is possible to have 4 CAN interfaces: can0, can1, can2 and can3. The adapter is very very simple, it is a PCB with three 40 ways connectors, see the following scheme. Country of origin is Italy Customs charge code / HS CODE 85489090
15,00 €In Stock -
65,00 € In StockCAN BUS DUAL ISO V2.1.4 TWO CHANNELS
CAN BUS DUAL ISO V2.1.4 is an extension board for RaspBerry Pi. It has two functionalities: Two can bus module One Real Time clock powered by a 12 mm battery (Battery CR1216 is not included). Country of origin is Italy Customs charge code / HS CODE 85489090
65,00 €In Stock -
45,00 € In StockCAN BUS DUAL BASE V2.1.4 TWO CHANNELS
CAN BUS DUAL BASE V2.1.4 is an extension board for RaspBerry Pi. It has two functionalities: Two can bus module One Real Time clock powered by a 12 mm battery (Battery CR1216 is not included). Country of origin is Italy Customs charge code / HS CODE 85489090
45,00 €In Stock -
32,00 € In StockCAN BUS DUAL BASE V2.1.4 ONE CHANNEL
CAN BUS DUAL BASE V2.1.4 is an extension board for RaspBerry Pi. It has two functionalities: One can bus module One Real Time clock powered by a 12 mm battery (Battery CR1216 is not included). Country of origin is Italy Customs charge code / HS CODE 85489090
32,00 €In Stock -
DUAL CAN PICO ADAPTER V 1.0
Dual Can Bus PICO is an adapter to use our Can Bus Board with PICO. The idea is to connect all the 40 pins connector of Raspberry to the new board. Raspberry PICO and Can Bus board NOT Included Country of origin is Italy Customs charge code / HS CODE 85489090
14,00 €In Stock
