CAN BUS DUAL BASE V2.1.4 ONE CHANNEL

128

New product

CAN BUS DUAL BASE V2.1.4 is an extension board for RaspBerry Pi.  

It has two functionalities:

  1. One can bus module
  2. One Real Time clock powered by a 12 mm battery (Battery CR1216 is not included).

Country of origin is Italy

Customs charge code / HS CODE 85489090

More details

99 Items

32,00 €

More info

Can Bus Dual Base Pi V 2.1.4 (new version of is a CAN Can Bus Dual Pi V 2.1) BUS Shield for RaspBerry Pi. It is an Open Hardware Design. It has two functionalities: a can bus module and an onboard Real Time clock powered by a 12 mm battery CR1216 (Battery is not included). The CanBus is based on a couple of MCP2515 SPI controllers and MCP2557 transceivers. All functionalities are full integrated in standard linux kernel, so, they can be available on fly, or at last recompiling linux kernel to add can bus functionalities. The real time clock is based on PCF85063 I2C controller. This is the same RTC of official carrier CM4IO. It is full compatible with linux too. Using I2C Kernel module, and standard kernel functions, date and hour can be set/get by simple commands. On the bottom side is located an on board battery to guarantee a data autonomy. In chapter hardware there are all informations on principal components, schematics to rebuild and modify Raspberry PI board.

Country of origin is Italy

Customs charge code / HS CODE 85489090

Accessories