SINGLE PAIR ETHERNET V1.0.0

640

New product

SINGLE PAIR ETHERNET V1.0.0 is an extension board for RaspBerry Pi.  

It has two functionalities:

  1. Single Pair Ethernet
  2. One Real Time clock powered by a 12 mm battery (Battery CR1216 is not included).

Country of origin is Italy

Customs charge code / HS CODE 85489090

More details

12 Items

95,00 €

More info

SINGLE PAIR ETHERNET V1.0.0 Shield for RaspBerry Pi is an Open Hardware Design. It has two functionalities: a Single Pair Ethernet module and an onboard Real Time clock powered by a 12 mm battery CR1216 (Battery is not included). The SPEis based onADIN1110 SPI controller. All functionalities are not yet full integrated in standard linux kernel, so, they can be available with source code in C and GCC Compiler. The real time clock is based on PCF85063 I2C controller. This is the same RTC of official carrier CM4IO. It is full compatible with linux too. Using I2C Kernel module, and standard kernel functions, date and hour can be set/get by simple commands. On the bottom side is located an on board battery to guarantee a data autonomy. In chapter hardware there are all informations on principal components, schematics to rebuild and modify Raspberry PI board.

Country of origin is Italy

Customs charge code / HS CODE 85489090